Atlantis Land FlyBoost CL100 User Manual page 32

Read-Only Parameters of
Neighbouring Access Points
Viewable from Site Survey page
Bssid
SSID
Chan
Auth
Alg
Signal
NOTE
Site Survey is used to scan and display all access points based on the
current security setting of your access point.
Explanation of the following information supplied by the Site Survey
according to the security setting:
• If the security mode is set to None or WEP, the scan will show all
available access points with no security or WEP security
• If the security mode is set to WPA-Personal, the scan will show all
available access points with all types of security from no security,
WEP security to WPA-Personal security.
Page 28
Description
Wireless MAC address of the access point
in an wireless network infrastructure.
Network name that uniquely identifies the
network to which the access point is
connected.
Channel being used for transmission.
Types of authentication, such as WPA,
WPA-Personal, etc being used by the
access point.
Types of algorithm, such as WEP, TKIP, etc
being used by the access point.
Strength of the signal received in
percentage.