Atlantis Land FlyBoost CL100 User Manual page 108

Destination
unreachabl
e
Source
quench
Redirect
Time
exceeded
Parameter
Problem
Timestamp
Request
Information
Request
Information
Reply
IGMP : This IP protocol is used to establish host memberships in particular
Types multicast groups on a single network. The mechanisms of the
protocol allow a host to inform its local router, using Host
Membership Reports.
Host
Membership
Report
Host
Membership
Query
Leave Host
Message
Source IP : This parameter allows you to specify workstation(s) generating
the data packets. Users can either set a single IP address or set a
range of IP addresses.
Destinatio : This parameter lets you specify the set of workstations that
n IP receive the data packets. Users can either set a single IP address
or set a range of IP addresses.
Source : You can control requests for using a specific application by
Port entering its port number here. Users can either set a single port
number or a range of port numbers.
Page 104
Informs the host that a
datagram cannot be
delivered.
Informs the host to lower the
rate at which it sends
datagrams because of
congestion.
Informs the host of a
preferred route.
Indicates that the Time-to-
Live (TTL) of an IP datagram
has expired.
Informs that host that there
is a problem in one the
ICMP parameter.
Information that is from the
ICMP data packet.
Information that is from the
ICMP data packet.
Information that is from the
ICMP data packet.
Information that is from the
IGMP data packet.
Information that is from the
IGMP data packet.
Information that is from the
ICMP data packet.