Table of Contents
Advertisement
Boiler Control Display
BOILER CONTROL DISPLAY
Standby Mode
After the boiler is turned on, the control panel will display
STANDBY mode as shown in the figure above.
This is the standard mode for the PRESTIGE. The con-
trol automatically returns to this mode after 20 minutes if
no keys have been pressed on the display.
The first character shows (on left side of display) the cur-
rent status of the boiler depending on the condition of
both the boiler and the burner. The last 3 characters indi-
cate the start temperature.
If the burner is blocked due to a "soft" lockout, the dis-
play alternates between a 9 followed by the boiler outlet
temperature and a "b" with a two digit error code.
8
Advertisement
Table of Contents
