Safety Information And Warnings - Ryobi ECS1285 Owner's Operating Manual

Table of Contents

Advertisement

SAFETY INFORMATION AND WARNINGS

DO NOT OPERATE THIS TOOL WHILE
UNDER THE INFLUENCE OF DRUGS, alcohol
or any medication.
AVOID UNINTENTIONAL STARTING. Always
check that the switch is in the OFF position
before plugging in the tool to the power supply.
Do not carry a plugged in tool with your finger
on the switch.
DO NOT USE TOOL IF SWITCH DOES NOT
TURN THE TOOL ON OR OFF. Have defective
switches replaced by an authorised service
centre.
TOOLS ARE NOT INTENDED FOR USE BY
YOUNG OR INFIRM PERSONS WITHOUT
SUPERVISION. Young children should be
supervised to ensure that they do not play with
the tool.
REMOVE ADJUSTING KEYS AND
WRENCHES BEFORE TURNING THE
POWER TOOL ON. A wrench or a key left
attached to a rotating part of the power tool may
result in serious personal injury.
DO NOT OVERREACH. Keep proper footing
and balance at all times. Do not use tool on a
ladder or unstable support. Secure tools when
working at elevated levels.
CONNECT DUST EXTRACTION EQUIPMENT.
If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
these devices can reduce dust related hazards.
DO NOT ALLOW PERSONS UNFAMILIAR
WITH THE POWER TOOL OR THESE
INSTRUCTIONS OPERATE THE POWER
TOOL. Power tools are dangerous in the hands
of untrained users.
POWERTOOL USE AND CARE
KNOW YOUR POWER TOOL. Read this
Operating Manual carefully learn its applications
and limitations as well as the specific potential
hazards related to this tool.
DO NOT FORCE THE TOOL. The tool will do
the job better and safer working at the rate for
which it was designed.
USE THE CORRECT TOOL FOR THE JOB. Do
not force small tools or attachments to do the
job of a heavier duty tool. Never use a tool for a
purpose for which it was not intended.
THE TOOL MUST BE USED FOR ITS
PRESCRIBED PURPOSE. Any use other than
those mentioned in this manual will be
considered a case of misuse.The user and not
the manufacturer shall be liable for any damage
or injury resulting from such cases of misuse.
SECURE YOUR WORK. Use clamps or a vice to
hold your work. It is safer than using your hands
and it frees both hands to operate the tool.
DISCONNECT IDLE TOOLS. Switch off the
power and disconnect the plug from the power
supply before servicing, when changing
accessories and when the tool is not in use.
MAINTAIN TOOLS WITH CARE. Keep tools
sharp and clean for better and safer
performance. Follow instructions for changing
accessories. Inspect tool cords periodically and,
if damaged have them repaired by an authorised
service facility. Inspect extension cords
periodically and replace them if damaged. Keep
tool handles dry, clean and free from oil and
grease. Never use brake fluids, petrol, petroleum
based products, or any strong solvents to clean
your tools.
CHECK DAMAGED PARTS. Before using a tool,
check that there are no damaged parts. If a part
is damaged, carefully determine if it will operate
properly and perform its intended function. Check
for misalignment of moving parts, binding of
moving parts, breakage of parts, proper mounting
and any other conditions that may affect the
operation of the tool. A part that is damaged
should be properly repaired or replaced by an
authorised service centre, unless otherwise
indicated in this Operating Manual. Defective
switches must be replaced by an authorised
service centre. Do not use a tool if the switch
does not turn the tool on and off correctly.
DISCONNECT THE PLUG FROM THE POWER
SUPPLY BEFORE MAKING ANY ADJUSTMENTS,
changing accessories, or storing the power tool.
Such preventative safety measures reduce the
risk of starting the power tool accidentally.
USE ONLY APPROVED PARTS. When
servicing, use only identical replacement parts.
Use an authorised service centre to fit
replacement parts.
DO NOT MAKE ANY CHANGES TO THE
TOOL. The manufacturer shall not be liable for
any changes made to the tool nor for any
damage resulting from such changes.
STORE TOOLS SAFELY. When not in use, tools
should be stored in a dry, high and locked-up
place, out of reach of children.
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ecs23235rg

Table of Contents