Reboot; Figure 37 Restore Settings; Figure 38 Reboot - LevelOne WAB-5120 User Manual

300mbps 5g wireless outdoor passive poe access point/bridge

Hide thumbs Also See for WAB-5120:

Table of Contents

Restore factory default settings via Reset Button

If software in the CPE is unexpectedly crashed and no longer reset the unit via Web, you may do

hardware reset via the reset button. Press and hold the button for at least 5 seconds and then

release it until the PWR LED gives a blink.

Reboot

You can reboot your CPE from "Configuration File" in "Management" as below:

Click "Reboot" and hit "Yes" upon the appeared prompt to start reboot process. This takes a few

minutes.

Table of Contents