Hardware Installation; Connect Up; Figure 3 Move The Cover; Figure 4 Cable Connection - LevelOne WAB-5120 User Manual

Hardware Installation

Connect up

1. The bottom of WAB-5120 300Mbps 5G Wireless Outdoor PoE Access Point/Bridge is a movable
cover. Loosen the screw with a Philips screwdriver.
take it out as the figure shown below.
Plug a standard Ethernet cable into the RJ45 port labeled "LAN 1". Do not plug the cable into
2.
the RJ45 port labeled "LAN 2".

Figure 3 Move the Cover

Figure 4 Cable Connection

Grab the cover and pull it back harder to