PowerWalker VI 1000 User Manual
  1. Manuals
  2. Brands
  3. PowerWalker Manuals
  4. UPS
  5. VI 1000
  6. User manual

PowerWalker VI 1000 User Manual

Uninterruptible power supply
Hide thumbs Also See for VI 1000:
1
2
3
4
5
6

Advertisement

Table of Contents

POWERWALKER
Uninterruptible Power Supply
Line Interactive VI 1000/1400/2000
Thank you for purchasing PowerWalker UPS.
Safety information and operating instructions
User's Manual
are included in this manual. To ensure the
correct use of the UPS, please read this
manual thoroughly before operate it. And
save this manual properly.
28-2PW0000003

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VI 1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for PowerWalker VI 1000

Summary of Contents for PowerWalker VI 1000

  • Page 1 POWERWALKER Uninterruptible Power Supply Line Interactive VI 1000/1400/2000 Thank you for purchasing PowerWalker UPS. Safety information and operating instructions User’s Manual are included in this manual. To ensure the correct use of the UPS, please read this manual thoroughly before operate it. And save this manual properly.

  • Page 2: Safety Requirements

    1. INTRODUCTION 2. SAFETY REQUIREMENTS PowerWalker VI series is an intelligent and compact line interactive UPS which is designed to protect your personal computer or sensitive electronic equipments. The UPS is Please save this manual properly. This manual includes important safety equipped with advanced microprocessor controlled and included built-in boost and buck information.
  • Page 3 Back Panel 3. OVERVIEW Front Panel 1000VA 1400VA/2000VA Battery Power Supplied Receptacle The power supplied receptacles are used for battery to power up your equipments while AC is failure. AC Input Power Receptacle ON/OFF Button The power receptacle is used to plug in the power cord that provides power to the Press the On/Off button to turn on or off Fault LED Circuit Breaker...

  • Page 4: Installation

    4. INSTALLATION Connect the Computer Connect the interface cable from your computer to the output receptacles on the back Before the installation, please ensure the power switch on the UPS is in “OFF” panel of the UPS. position, and the voltage of the AC utility source corresponds to the identification label Connect the Telephone/Modem Line on the rear panel.

  • Page 5: Battery Replacement

    5. BATTERY REPLACEMENT 6. MONITORING SOFTWARE Before battery replacement, please ensure the power switch on the UPS is in “OFF” After the UPS has been installed, you must install the software(Smart Power) that position. came packaged with your UPS. Smart Power monitoring software performs the Step 1: Remove the front panel of the UPS monitoring and controlling functions.

  • Page 6: Troubleshooting

    7. TECHNICAL SPEICIFICATION 8. TROUBLE SHOOTING MODEL PowerWalker PowerWalker PowerWalker To call for service, please have the model, serial number, and description of 1000 1400 2000 the problem available. VA/W 1000VA/600W 1400VA/840W 2000VA/1080W CAPACITY INPUT Voltage 110/120VAC or 220/230/240VAC PROBLEM...

This manual is also suitable for:

Vi 1400Vi 2000

Table of Contents