Advertisement
Quick Links
F A L C O N
WORLD CLASS SE CURITY
FALCON PREDATOR EVO3
2 Way Security System
Owner's Manual
HELPLINE: 0906 700 10 20
(All calls charged at 50p/min)
Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK
Internet: http://www.falcon-security.com
Email: support@falcon-security.com
1
Advertisement
Related Manuals for Falcon PREDATOR EVO3
Summary of Contents for Falcon PREDATOR EVO3
- Page 1 F A L C O N WORLD CLASS SE CURITY FALCON PREDATOR EVO3 2 Way Security System Owner’s Manual HELPLINE: 0906 700 10 20 (All calls charged at 50p/min) Falcon Security Ltd. Unit 9 Tanning Court, Warrington, Cheshire, WA1 2HF, UK Internet: http://www.falcon-security.com Email: support@falcon-security.com...
- Page 2 1) Main Features Hopping code data transmission Central Lock System 01> Includes Two Way remote control Compatible with dual stage 02> 10> Central Lock System Power Saving transmitter 02> 2-Way FM/AM transmission up to 11> Code learning microprocessor 04> 1000/350 meters Dual stage Shock Sensor 05>...
- Page 3 02. Battery Saving a) Pressing button #2+4 once will start the battery saving mode and the buzzer will sound to confirm. The remote control will enter battery saving mode 70sec. after pressing button #1 to disarm the system. Pressing any button during the 70 sec.
- Page 4 LED will be off. 08. Trigger and Responses a) Shock sensor triggers * When disarming the system: If the shock sensor has been triggered during the armed mode, the Red LED will flash once for 15 sec. and buzzer sounds. * When the system is in armed mode: The red LED will flash once for 15 sec.
- Page 5 Under the disarm mode Turn the ignition switch ON/OFF 3 times (each time within 1 sec., or alarm system will ignore it) and stay in ON position Siren will sound for 2 seconds, and the alarm will enter into code learning mode Press button #1 within 10 seconds, the siren will chirp twice and the hazard lights flash twice to confirm the code has learned Apply the same procedure for second, third and fourth remote controls...
- Page 6 alarm, the doors will lock and the siren will chirp once and the indicator lights flash once to confirm the arm status. The LED will turn on and flash slowly after 2 seconds. If a door, the bonnet or boot were not closed properly when the system was 7.2>...
- Page 7 With the alarm disarmed switch the ignition on and press buttons #1+#2 12.1> once at the same time; the lights will flash once, within 2 seconds press button #1+#2 once again at the same time, the siren will chirp once to confirm the system is now in valet mode.
- Page 8 20) Auto Re-Arm When Enabled: After pressing button #1 to disarm the alarm the LED will flash rapidly. If a door is not opened or the ignition turned on withinr 30 seconds the lights will flash once, the siren will chirp once and the system will enter into the arm mode.