Related Manuals for Falcon TBM-18
Summary of Contents for Falcon TBM-18
- Page 1 2.4 GHz WIRELESS SURVEILLANCE SYSTEM Operating Instructions Teste d Comp ly With FCC Standards Model # TBM-18 BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Be sure to save this booklet for future reference.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. • This product is intended for non-commercial, household use in providing video surveillance. •... - Page 3 General Description: The wireless, Bear Video Camera (Model #TBM-18) transmits video and audio signals at a frequency of 2.4 GHz to the video signal receiver (Model #VSB8RX). The video signal receiver outputs these signals via cable to your TV/VCR for monitoring and/or recording.
- Page 4 3. Select the desired transmission channel for the Bear video camera. NOTE: The Model #TBM-18 Bear video camera has four (4) different transmission channels. The Bear video camera has been set to transmit on CH 1 at the factory. Do not set and/or use more than one (1) video camera on the same transmission channel in order to prevent signal interference and unclear picture reception.
- Page 5 Plug Video /Video Cable White Yellow 2.4GHz Plug Plug Receiver (VSB8RX) Audio Video Input Input Jack Jack 2. Connect the AC Power Adaptor Jack end to the 9V DC Power Input Jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4.
-
Page 6: Troubleshooting
This Therefore unit is for those who TV set without A/V port Coaxial Cable Input Signal Selector TV Antenna Yellow Transfer Plug Connector Plug AC Adapter White Video /Video Plug 2.4GHz Cable Receiver (VSB8RX) TROUBLESHOOTING No picture after turning on the TV. Check the power supply: •... -
Page 7: Technical Specifications
TECHNICAL SPECIFICATIONS Transmitter Receiver Power Supply Input: 110V AC (AC Power Adaptor) Output: 9V, 350 mA 32 ° F (0° C) ~ 126° F (45° C) Operating Temperature 70 ° F (25° C) ~ 112° F (40° C) Operating Environment Channels Four (4) Receiver Sensitivity... -
Page 8: Limited Warranty
LIMITED WARRANTY This item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only to the original retail purchaser, and excludes any damage to the product resulting from accident or misuse. - Page 9 2.4 GHz WIRELESS SURVEILLANCE SYSTEM Operating Instructions Teste d Comp ly With FCC Standards Model # TCM-30 BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Be sure to save this booklet for future reference.
- Page 10 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. • This product is intended for non-commercial, household use in providing video surveillance. •...
- Page 11 General Description: The wireless, Clock Video Camera (Model # TCM-30) transmits video and audio signals at a frequency of 2.4 GHz to the video signal receiver (Model #VSB8RX). The video signal receiver outputs these signals via cable to your TV/VCR for monitoring and/or recording. Equipment &...
- Page 12 Installation: Clock Video Camera (Model #TCM-30) 1. Power by DC power of the Clock video camera. 2. Position the video camera in the desired location. NOTE: The transmission range of the Clock video camera at open side up to 150 ft. Real distance is depends on its operating environment.
- Page 13 2. Connect the AC Power Adaptor Jack end to the DC Power Input Jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4. Plug the AC Power Adaptor into a standard 120V AC electrical outlet. 5.
- Page 14 Unclear picture reception. Check to ensure the receiver channel is set properly for the desired video camera. Shorten the transmission range/distance between the transmitter and receiver. Reposition and/or adjust the Clock camera. Check 9V Batter power is running out or not. Unclear picture focus.
- Page 15 LIMITED WARRANTY This item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only to the original retail purchaser, and excludes any damage to the product resulting from accident or misuse.
- Page 16 2.4 GHz Jewel Box Wireless Video Camera Operating Instructions Teste d Comp ly With FCC Standards Model # TJM-275 BEFORE OPERATING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Be sure to save this booklet for future reference.
- Page 17 IMPORTANT SAFETY INSTRUCTIONS WARNING: TO AVOID THE RISK OF ELECTRICAL SHOCK, ALWAYS MAKE SURE THE PRODUCT IS UNPLUGGED FROM THE ELECTRICAL OUTLET BEFORE RELOCATING, SERVICING, OR CLEANING IT. • This product is intended for non-commercial, household use in providing video surveillance. •...
- Page 18 General Description: The wireless, Jewel box Video Camera (Model #TJM-275) transmits video and audio signals at a frequency of 2.4 GHz to the video signal receiver (Model #VSB8RX). The video signal receiver outputs these signals via cable to your TV/VCR for monitoring and/or recording. Equipment &...
- Page 19 Installation: Jewel box Video Camera (Model #TJM-275) 1. Power by either the Battery and DC power of the Jewel box video camera. 2. Position the video camera in the desired location. NOTE: The transmission range of the Jewel box video camera at open side up to 150 ft. Real distance is depends on its operating environment.
- Page 20 2. Connect the AC Power Adaptor Jack end to the DC Power Input Jack of the receiver. 3. Select/match the receiver channel to the desired video camera transmission channel. 4. Plug the AC Power Adaptor into a standard 120V AC electrical outlet. 5.
- Page 21 Shorten the transmission range/distance between the transmitter and receiver. Reposition and/or adjust the Jewel box camera. Unclear picture focus. The video camera is set at 4.9 ft (1.5 m) with a Free focus feature. TECHNICAL SPECIFICATIONS Transmitter Receiver Power Supply Output: 9V, 350 mA (AC Power Adaptor) 32 °...
- Page 22 LIMITED WARRANTY This item is warranted to be free from defects in materials or workmanship for a period of one (1) year from the original date of purchase under normal household use. Within the warranty period, we will either repair or replace the product at our option. This warranty extends only to the original retail purchaser, and excludes any damage to the product resulting from accident or misuse.
Need help?
Do you have a question about the TBM-18 and is the answer not in the manual?
Questions and answers