PROEL PLLEDMLBG User Manual page 7

OPERATION INSTRUCTIONS
The LED moving head uses LED digital display method to control
the channel setting.
The LED moving head adopts international standard DMX-512
signal, multiple lights can be controlled by the controller due to use
the channel setting (the details are listed in Appendix 2
Use the XLR-XLR cable from the signal output port of the consol to
connect the signal input port of the first light, connect the signal
output port of the first light with the signal input port of the second
light, and so on, until all lights are connected.
For all installation, having long
signal cables or in the presence of
electrical noise, for example a
discotheque, it is recommended
practice to use a DMX terminator:
this assist in preventing corruption
of the digital control signal by
external noise. The DMX terminator
is simply an XLR connector with a 120Ω (Ohm) resistor connected
across pins 2 and 3, which is then plugged into the DIGITAL THRU
socket on the last projector in the chain.
The LED moving head uses core XLR outlet (plug). A transfer line
16