Table of Contents
Advertisement
LED Move Head Light use 6A / 250V fuse.
RIGGING
DANGER TO LIFE: Please consider the respective national norms
during the installation. The installation must only be carried out by
an authorized dealer.
The installation must always be secured with a secondary safety
attachment safety rope). This secondary safety attachment must be
constructed in a way that no part of the installation can fall down if the
main attachment fails. A safety rope which already hold the strain of a
crash or which is defective must not be used again.
1.
Omega-holders
2.
Clamps (optional)
3.
Screws
4.
Safety-rope
Unscrews 4 screws (3) on the base. Screw one clamp each via a M12
screw and nut onto the Omega-holders. Insert the quick-lock
fasteners of the first Omega-holder into the respective holes on the
bottom of the device. Tighten the quick-lock fasteners fully clockwise.
Install the second Omega-holder.
Use 2 appropriate clamps to rig the fixture on the truss; make sure
that the device is fixed properly; make sure that the structure (truss)
to which you are attaching the fixture is secure.
14
Advertisement
Table of Contents
