Table of Contents
Advertisement
4.
BIOS CONFIGURATION
Award's BIOS ROM has a built-in Setup program that allows users to modify
the basic system configuration. This type of information is stored in battery-
backed CMOS SRAM so that it retains the Setup information when the power
is turned off.
4.1. ENTERING SETUP
l
Suspend Mode Option
The default value is PowerOn Suspend
Suspend to Disk
VGA Active Monitor
The default value is Disabled.
Disabled
Enabled
Soft-off by PWR-BTTN
The default value is Instant-Off.
Instant-off
Delay 4 Sec.
Resume by Alarm
The default value is Disabled.
Disabled
Enabled
If the default value is Enabled.
Date ( of Month) Alarm :
Time ( hh: mm: ss) Alarm :
IRQ [3-7,9-15], NMI
The default value is Enabled.
Disabled
Enabled
Set the system to Suspend to Disk mode
Disable monitor VGA activity.
Enable monitor VGA activity.
Soft switch ON/OFF for POWER ON/OFF
Soft switch ON 4sec. for POWER OFF.
Disable this function.
Enable alarm function to POWER ON system.
Disable this function.
Enable monitor IRQ [3-7,9-15] for Green event.
0~31
(0~23) : (0~59) : (0~59)
BIOS Configuation
Advertisement
Table of Contents
