Bios Configuration; Entering Setup; Control Keys - Gigabyte 6LMM7 User Manual

Intel celeron processor mainboard
Table of Contents

Advertisement

4.

BIOS CONFIGURATION

Award's BIOS ROM has a built-in Setup program that allows users to modify the
basic system configuration. This type of information is stored in battery-backed
CMOS SRAM so that it retains the Setup information when the power is turned
off.

4.1. ENTERING SETUP

Power ON the computer and press <Del> immediately will allow you to enter
Setup. If the message disappears before you respond and you still wish to enter
Setup, restart the system to try again by turning it OFF then ON or pressing the
"RESET" bottom on the system case. You may also restart by simultaneously
press <Ctrl>, <Alt>, and <Del> keys.

4.2. CONTROL KEYS

Up arrow
Move to previous item
Down arrow
Move to next item
Left arrow
Move to the item in the left hand
Right arrow
Move to the item in the right hand
Esc key
Main Menu - Quit and not save changes into CMOS
Status Page Setup Menu and Option Page Setup Menu -
Exit current page and return to Main Menu
PgUp key
Increase the numeric value or make changes
PgDn key
Decrease the numeric value or make changes
F1 key
General help, only for Status Page Setup Menu and Option
Page Setup Menu
F2 key
Change color from total 16 colors
F3 key
Reserved
F4 key
Reserved
F5 key
Restore the previous CMOS value from CMOS, only for
Option Page Setup Menu
F6 key
Load the default CMOS value from BIOS default table, only
for Option Page Setup Menu
F7 key
Load the default
F8 key
Reserved
F9 key
Reserved
F10 key
Save all the CMOS changes, only for Main Menu
BIOS Configuration
4-1

Advertisement

Table of Contents
loading

Table of Contents