Gigabyte 6EX User Manual page 47

Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or
conventional) memory installed in the system.
The value of the base memory is typically 512 K for systems
with 512 K memory installed on the motherboard, or 640 K for
systems with 640 K or more memory installed on the
l
Suspend Mode Option
The default value is PowerOn Suspend
Suspend to Disk
VGA Active Monitor
The default value is Disabled.
Disabled
Enabled
Soft-off by PWR-BTTN
The default value is Instant-Off.
Instant-off
Delay 4 Sec.
Resume by Alarm
The default value is Disabled.
Disabled
Enabled
If the default value is Enabled.
Date ( of Month) Alarm :
Time ( hh: mm: ss) Alarm :
IRQ [3-7,9-15], NMI
The default value is Enabled.
Disabled
Enabled
Set the system to Suspend to Disk mode
Disable monitor VGA activity.
Enable monitor VGA activity.
Soft switch ON/OFF for POWER ON/OFF
Soft switch ON 4sec. for POWER OFF.
Disable this function.
Enable alarm function to POWER ON system.
Disable this function.
Enable monitor IRQ [3-7,9-15] for Green event.
0~31
(0~23) : (0~59) : (0~59)
BIOS Configuation