114
Picture and Sound Controls
Using the advanced picture settings features
Using the advanced picture settings features
NOTE
Resolution+
If the Resolution+ set to On (this is the default), the clarity levels can be
adjusted automatically.
1
Press the SETUP button.
2
Select Picture > Advanced Picture Settings > Resolution+ and
press the OK button.
3
Press the p / q (arrow) buttons to select On.
4
Press the EXIT button.
NOTE
Dynamic Contrast
Dynamic Contrast detects changes in picture quality that affect the
appearance of your contrast settings and then automatically adjusts the
video.
1
Press the SETUP button.
2
Select Picture > Advanced Picture Settings > Dynamic Contrast
and press the OK button.
3
Press the p / q (arrow) buttons to select High, Middle, Low, or
Off.
4
Press the EXIT button.
®
DynaLight
The DynaLight
each video frame and automatically adjusts backlight intensity based
on the content to create higher dynamic contrast, for deeper blacks and
increased depth.
1
Press the SETUP button.
2
Select Picture > Advanced Picture Settings > DynaLight and
Some of the Advanced Picture Settings features will not be available for
adjustment when the picture mode is set to AutoView.
If the picture mode is set to AutoView, Resolution+ is not available.
v
This feature may not work properly depending on the content.
v
Noise may appear on the image depending on the device connected to
v
the TV (e.g. a device with a specific enhancer function).
®
dynamic backlight control monitors the brightness of