Table of Contents
Advertisement
3
Press the p / q (arrow) buttons to select On or Off, and then press
the OK button.
Device Name setup
The device name as a Media Renderer can be changed.
1
Press the SETUP button.
2
Select Network > Network Device Setup > Device Name Setup
and press the OK button.
3
Select the Device Name field. Press the OK button.
The Software Keyboard screen appears.
4
Input the device name by using the Software Keyboard. To save
your setting, press the GREEN button.
5
Select Done. Press the OK button.
NOTE
The maximum number of characters allowed for the device name is 15.
Only 0-9, A - Z (upper case only), "-" can be used in the device name.
Advanced features
4K Demonstration
173
Advertisement
Table of Contents
