Setting The Sleep Temperature - Carrier Edge Performance Owner's Manual

OPERATING THE THERMOSTAT

Setting the sleep temperature

1. Press the sleep button located under the display in the
center. You will see a triangle icon (B) above the sleep
button.
2. You will see the heating and cooling temperatures that
were set at the factory. To use these, just close the door.
3. To change the heating setting, press the mode button
until you see the word heat on the screen on the left.
4. Press the up or down button on the right until you reach
the desired temperature setting. The arrow pointing to
the away button will disappear.
5. Press and hold the sleep button for about three seconds.
The sleep arrow will be displayed, indicating that the
thermostat has saved your settings.
6. To change the cooling temperature setting, press the
mode button repeatedly until you see the word cool on
the screen on the right.
18