Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Cancel
To use the controls:
1.
Press
2.
Use
or
function. If there is a sub-menu, you can move between options using
press
3.
Press
4.
Press and hold
adjustments to the OSD. Press and hold
adjustments to the OSD.
5.
Enables DDC/CI by default. Use OSD Exit Key, Press and hold
disable / enable DDC/CI function. The words "DDC/CI disable" shows on the screen.
Brightness / Contrast / DCR
OK
to open the main OSD menu.
to move among the icons. Select an icon and press
to select that function. Use
to move backwards through the sub-menus and exit from the OSD.
for 10 seconds to lock the OSD. This will prevent accidental
or
to make adjustments then press
for 10 seconds to unlock the OSD and allow
to access the selected
or
, then
to save.
for 10 seconds to
2-4
Chapter 2.