Table of Contents
Advertisement
Installing the Seat
1.
Raise the backrest to an upright position while pushing the handle
down.
2.
Raise the seat until it reaches a locked position. (See Fig. 6).
Installing the batteries
1.
Take the batteries out of the box.
2.
Place the battery into the rear area with the protruding part towards
rear. (See Fig. 7).
3.
Then, connect the side with the electrical connection.
Note:
The batteries are partially charged. We recommend charging them
fully prior to usage.
Figure 6
Figure 7
Hide quick links:
Advertisement
Table of Contents
