Table of Contents
Advertisement
Connecting and networking Pocket
LOOX 610 with other devices
The Pocket PC offers a wide range of ways to exchange data with other devices or to work in a
network.
You have already become familiar with data synchronisation via ActiveSync and an ActiveSync cable
in the "Synchronising data with ActiveSync" chapter. You can connect the ActiveSync cable
provided to any PC or notebook equipped with a USB port. An active ActiveSync cable for devices
with a serial port is also available as an accessory.
In addition, you also have the infrared interface, BLUETOOTH and, depending on the model,
Wireless LAN available to you for wireless communication. With various cards which you can
purchase as accessories (LAN card, W-LAN or modem card) you can integrate your Pocket PC in
networks and establish a connection to the Internet.
This chapter provides you with information on wireless data transfer
−
via infrared interface
−
via BLUETOOTH (depending on model)
−
via Wireless LAN (depending on model)
Please see the documentation of the respective card for information on using LAN, W-LAN or
modem cards.
Safety precautions when using radio components
Switch off BLUETOOTH when you are in a hospital or near a medical electronics system, as the
radio waves transmitted by the radio component may impair the operation of the medical devices.
Do not bring the Pocket LOOX 610 into an operating room with the radio component switched on, as
the radio waves transmitted by BLUETOOTH may impair the operation of medical electronic
systems used there.
Keep Pocket LOOX 610 at least 20 cm from a pacemaker with the radio components switched on,
as otherwise the proper functioning of the pacemaker can be interfered with by the radio waves.
The radio waves transmitted by the radio component can cause an unpleasant humming in hearing
aids.
Switch off BLUETOOTH when you are in an aircraft or driving in a car.
Do not bring the Pocket LOOX 610 near flammable gases or into potentially explosive atmospheres
with the radio component switched on (e.g. petrol station), as the radio waves transmitted can cause
an explosion or a fire.
The company Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television
faults arising from unauthorised changes made to this device. Fujitsu Siemens is, furthermore, not
responsible for replacing and / or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and/or exchanging
devices.
A26391-K139-Z120-2-7619
55
Advertisement
Table of Contents
