Removing Stylus From Pocket Pc; Actuate Full Reset Switch - Fujitsu LOOX 610 Easy Manual

Operating pocket LOOX 610

Removing stylus from Pocket PC

Actuate full reset switch

The first time you start your Pocket LOOX 610, you must actuate the full reset switch. The full reset
switch is on the back of the Pocket LOOX and is covered by the battery during normal operation.
Only actuate the full reset switch during the initial start-up. To switch the Pocket PC on or
!
off after the initial start-up, briefly press the Suspend button.
If the full reset switch is used to shut down the Pocket LOOX 610, this resets it back to
the delivery state and the entire RAM contents are lost. This means you loose all data
(documents, additionally installed programs, personal settings) that you haven't saved
elsewhere.
Therefore, remember to make a regular data backup with synchronisation (see the
"Synchronising data with ActiveSync" chapter) or on corresponding memory cards
(available as an accessory). The FSC Backup program is provided on your Pocket LOOX
610 for completely backing up the RAM memory on memory cards (see the "Backing up
data with FSC Backup" chapter ).
12
Ê
2
Ê
1
Use the ribbed surface (1) to slide the stylus
slightly out.
Pull out the stylus completely (2).
A26391-K139-Z120-2-7619