Using The Cradle; Selecting Location For Cradle - Fujitsu LOOX 610 Easy Manual

Using the cradle

The cradle fulfils two functions:
•
Charging the batteries in the Pocket PC
•
Data synchronisation between the Pocket PC and the PC/notebook
In the following sections you will learn what you should observe when setting up the cradle and
when using the above functions.

Selecting location for cradle

Place the cradle on a stable, flat and nonslippery surface. In view of the multitude of different
finishes used on furniture, it is possible that the rubber feet of the Pocket PC will mark the surface
they stand on.
Never place the power adapter on a heat-sensitive surface.
The cradle and the power adapter should be at least 200 mm apart.
Keep other objects 100 mm away from the cradle and its power adapter to ensure adequate
ventilation.
The Pocket PC and the cradle should not be subjected to extreme environmental conditions. Protect
the Pocket LOOX 610 and cradle from dust, moisture and heat.
A26391-K139-Z120-2-7619
1 = Connection for the ActiveSync cable
2 = DC jack (DC IN)
2 1
Operating pocket LOOX 610
25