Table of Contents
Advertisement
Pocket LOOX 610 in mobile use
Connecting Pocket PC directly to power adapter
In the following text the letters and numbers after the designations for the various cables
i
refer to the illustration Delivery scope in your "Getting Started" manual (fold-out cover
page). Please look there if you're not sure which cable is meant.
Ê
Connect the power adapter cable to the DC socket (27) of the Pocket PC.
Ê
Connect the power cable (F) into the power adapter AD 3110 (F).
Ê
Plug the power cable (F) into a mains outlet.
The integrated battery of your Pocket PC will be recharged.
Optimising battery performance
When you have completely charged the battery, you can operate the Pocket PC for up to 12 hours
without a power connection. However, it is not possible to exactly specify the maximum operating
time, as different applications use more or less energy.
In the system settings you can make settings that help you save energy when using your
Pocket PC. These settings enable you to use the battery operating time optimally. Please see the
"Configuring Pocket LOOX 610" chapter for information on how to save energy.
In the default setting, a setting is activated that automatically switches the Pocket PC into
i
the Suspend mode after three minutes when working without a power connection if no
entries are made during this time. You can switch on the Pocket PC again at any time by
briefly pressing the Suspend button and then continue working where you left off.
Checking battery charge level
You can display the battery charge level under Start - Settings - System - Power.
38
A26391-K139-Z120-2-7619
Advertisement
Table of Contents
