Switching Pocket Pc Off And On; Switch On And Off In Suspend Mode - Fujitsu LOOX 610 Easy Manual

Table of Contents

Advertisement

Operating pocket LOOX 610

Switching Pocket PC off and on

After the initial start-up, you usually switch the Pocket LOOX 610 into the Suspend mode when not
in use. It is only practical or necessary to switch off the Pocket PC completely with the Full Reset
switch. In the following sections we will first explain operation in the Suspend mode, and then the
ability to restart the Pocket LOOX 610 with a soft or full reset.

Switch on and off in Suspend mode

Switching off with Suspend button
Ê
Press the Suspend button (11) briefly to switch off the Pocket PC.
If you have specified a switch-off time with the system settings, your Pocket PC will
i
automatically switch into the Suspend mode after this specified time.
There are two ways to switch on your Pocket PC:
Switching on with Suspend button
Ê
Briefly press the Suspend button (11) to switch on the Pocket PC.
The application you have just been working on or the Today screen appears on the screen when
you have not used your Pocket PC for at least four hours.
The application you were working on before you switched off the Pocket PC with the Suspend
button appears on the screen. The Today screen appears if you switch on your Pocket PC again
with the Suspend button after more than four hours.
Switching on with application buttons
By default, you can also switch your Pocket LOOX on by briefly pressing one of the application
buttons (12, 14, 15, 16). The applications assigned to the respective button appears on the screen.
The applications CONNECT2AIR, Today, Contacts and Calendar are preset. However, you can change
the applications to be called up at any time according to your needs (see the "Configuring Pocket
LOOX 610" chapter) so that your preferred program opens immediately at the press of a button.
By making the appropriate setting in FSC KeyLock (see chapter "Configuring Pocket LOOX
i
610"), you can also prevent the Pocket PC from being switched on when an application
button is pressed.
16
A26391-K139-Z120-2-7619

Advertisement

Table of Contents
loading

Table of Contents