Installing/Removing The Processor; Technical Data - Fujitsu Siemens Computers D2750 Short Description

Brief description of mainboard

Installing/removing the processor

Disconnect the system from the mains voltage before performing any of the tasks
described below. Details are contained in the operating manual of your system.

Technical data

• LGA775 socket, max. 95W
• Intel® Core 2 Quad, 1333/1066 MHz FSB
TM
• Intel® Core 2 Duo, 1333/1066/800 MHz FSB
TM
• Intel® Pentium® Dual Core E2xxx, 800 MHz FSB
• Intel® Celeron® 4xx, 800 MHz FSB
• A current list of the processors supported by this mainboard is available on the
Internet at: "www.fujitsu-siemens.com/mainboards".
Never touch the underside of the processor. Even minor soiling such as grease
from the skin can impair the processor's operation or destroy the processor.
Place the processor in the socket with extreme care, as the spring contacts
of the socket are very delicate and must not be bent.
If one or more spring contacts are bent, on no account insert the processor as it
may be damaged by doing so. Please contact the responsible vendor.
2 - English A26361-D2750-Z110-1-7419, edition 2