Table of Contents
Advertisement
Troubleshooting
Problem: No power; Standby LED on the front panel of the Fusion 8100 is not lit.
•
Verify that your power source is operating correctly.
•
Verify that the Power switch on the rear panel of the Fusion 8100 is turned On.
Problem: No video.
•
Verify that your source component and TV or monitor work
(connect them together directly).
•
Check your HDMI cables and connectors.
•
Verify that you have the correct Input selected on the Fusion 8100.
Problem: No audio with a video source.
•
Verify that you have configured the audio source for that input to be the same HDMI input as
the video source.
•
If you are using a different audio source (such as a different output from a Blu-Ray player),
verify that the audio source you have configured is (still) active.
•
Try re-selecting the Input.
•
Make sure the Fusion 8100 isn't muted or turned all the way down.
•
Make sure you don't have headphones plugged in
(headphones will mute the main output).
•
Check your interconnects, speaker cables, and speakers.
Problem: No audio with an audio-only source.
•
Make sure the Fusion 8100 isn't muted or turned all the way down.
•
Make sure you don't have headphones plugged in
(headphones will mute the main output).
•
Check your interconnects, speaker cables, and speakers.
Problem: The remote control doesn't work (but everything else works as normal).
•
Replace the batteries in the remote control.
•
If the Fusion 8100's front panel is in direct sunlight, try moving it (sunlight can jam the signal).
•
Look for other sources of IR signal noise that may interfere with the signal
(plasma TVs, certain CF or halogen lamps, and other sources of IR light).
Problem: No audio output from ONLY the SBL and SBR speakers OR
No audio output from ONLY the Zone 2 loudspeakers.
•
Make sure the Back Channel switch is in the correct position.
If none of these simple suggestions eliminates your problem, please contact Emotiva Technical
Support, at 1-877-366-8324, where a real live person will be happy to get you up and running.
Fusion 8100: User Manual
Page 53
Hide quick links:
Advertisement
Table of Contents
