Emotiva Fusion 8100 User Manual page 40

Fusion 8100: User Manual
Enhanced Bass is a special function intended to enhance the bass capabilities of systems with
both Large front speakers and a subwoofer. When enhanced Bass is set to On, bass frequencies
from the front channels are also sent to the subwoofer (even if the front speakers are set to Large).
Note: To configure the Fusion 8100 as a "regular 7.1 channel receiver", the Back Channel switch
on the rear panel of the Fusion 8100 should be IN, Front Bi-Wire in the The Setup / Speaker
Setup Submenu should be set to OFF, and FvH in the Setup / Speaker Setup / Size & Crossover
Submenu should be set to NONE.
Note: If the Back Channel switch on the rear panel of the Fusion 8100 is in the OUT position,
then the SBL and SBR amplifier channels will be assigned to Zone 2. If you do NOT configure
both Back L/R and FvH Speakers to None in this menu, when the Back Channel switch is in the
OUT position, rear surround or front height content will be discarded.
Page 34