Fusion 8100 Front Panel - Emotiva Fusion 8100 User Manual

Fusion 8100: User Manual

Fusion 8100 Front Panel

1 4
2 3 5 6 7 8 9
1. Input Selector (rotary encoder)
Turn this to quickly select between configured inputs; once the correct input is selected, press it
to "lock in" your choice.
Note: The Input Selector can only select between inputs that are enabled. To access inputs
which are not enabled, you must use the Input Menu.
2. Standby Button
Press this to switch the Fusion 8100 from Standby to On; press it again to return the Fusion 8100
to Standby mode. (The rear panel AC power switch must be On.)
3. Standby LED
This LED is red when the Fusion 8100 is in Standby mode, and blue when the Fusion 8100 is On.
4. Front Panel Display
Large, clear, easy to read VFD status display.
5. Menu Button
Press this button to activate the configuration menu.
6. Left, Right, Enter, Up, Down, and Return Buttons
When the configuration menu is active, these buttons are used to navigate the menu.
When the menu is not active, use the Left and Right buttons to select between inputs.
Page 6