Setup / Speaker Setup Submenu - Emotiva Fusion 8100 User Manual

Setup / Speaker Setup Submenu

Input
Input Setup
Playback
Speaker Setup
Auto Room/EQ
Option
Load Default
Version
The Setup / Speaker Setup Submenu allows you to access the menus on the Fusion 8100 for
configuring speaker sizes and crossovers, levels, and distances.
Note: The Fusion Advanced Room Correction System will automatically select optimal values
for the size, crossover point, distance, and level of each speaker. These controls are provided
for users who either prefer to make their own adjustments using a sound level meter or real
time analyzer, or who wish to make "fine tuning" adjustments to the results of the automatic
room correction.
Note: If the Back Channel switch on the rear of the Fusion 8100 is OUT, then the SBL and SBR
Speaker Outputs will provide audio from Zone 2. If that switch is IN, then the content provided
by those speakers will be controlled by the Fusion 8100's configuration menus.
If the Back Channel switch on the rear of the Fusion 8100 is IN, and Front Bi-Wire is set to On
in this menu, then those outputs will duplicate the Front Left and Front Right Main Speaker
Outputs and can be used to "vertically bi-amp" your front speakers (this menu setting takes
priority over other menu settings, but not the rear panel switch).
If the Back Channel switch on the rear of the Fusion 8100 is IN, and Front Bi-Wire is set to Off in
this menu, then the SBL and SBR speakers will be assigned to EITHER Surround Back Left and
Surround Back Right, OR FvH (front vertical height) speakers, depending on the setting in the
Setup / Speaker Setup / Size & Crossover Submenu.
Fusion 8100: User Manual
Mode Parameter
Size/Crossover
Noise Test
Speaker Distance
LFE Level
Front Bi-Wire
Page 32
Zone Setup
OFF