Configuration And Operation; Menus - Emotiva Fusion 8100 User Manual

Fusion 8100: User Manual

Configuration and Operation

Configuring Inputs
The Fusion 8100 allows any input connector to be assigned to any input source using the Input
Setup configuration screen.

Menus

The Fusion 8100 is configured using a set of easy-to-use menus. When you first access the menu
system using either the Menu button on the Fusion 8100 front panel or the remote control, the
menu will open displaying one of the five main menu screens (Input, Mode, Parameter, Zone, or
Setup).
Use the Left and Right navigation buttons (on the front panel or remote control) to move between
the different top menu screens. In most cases, pressing either the Down arrow key or Enter will
enter the menu page. The hints line at the bottom of the menu screen will always indicate which
keys are valid in your current context.
A small "down arrow" icon on the bottom right corner of the menu screen indicates that the menu
is longer than a single page. If so, pressing the Down arrow when you are on the bottom item on
the menu will move you to the second page of the menu.
Note: Operation of the Fusion 8100 is relatively straightforward, and screen hints are provided
to make navigation easier. If you are uncertain which navigation keys are active in your current
menu context, refer to the hints line at the bottom of the screen.
Page 20