Emotiva Fusion 8100 User Manual page 49

Fusion 8100: User Manual
The final results are then displayed, and you are prompted to save them.
Note: The results displayed by the Fusion Advanced Room Correction System are provided
to give you general insight into the areas where corrections have been implemented, and
the frequency bands and ranges which are affected by those corrections, and should not be
interpreted to literally represent the correction curve itself. The details of the full calibration
process, and the resulting correction curves, are far more complex.
The values provided are actually representative of the general offset values used to apply
the corrections, and so adjusting them will produce a corresponding change in the correction
curve (so you can, for example, increase the boost or cut in a particular band by adjusting the
corresponding value in the Fusion Advanced Room Correction System configuration), but they
should not be interpreted as representing the entirety of the correction that is applied, and
CANNOT be copied into a Manual EQ configuration memory to produce a Manual EQ setting
similar to the Auto EQ results. Setting all values in the Auto EQ memory bank to their flat values
also will NOT result in a flat response curve.
Page 43