Queue-Based Netware Printing (Pure Ip) - Axis 5470 User Manual

AXIS 5470e/570/670e User's Guide

Queue-based NetWare Printing (Pure IP)

Follow the instructions below to install the AXIS 5470e/570/670e in the NetWare Pure IP
environment:
1. Start the Configuration Wizard from the User mode in the AXIS 5470e/570/670e Web
interface.
2. Click your way through the Wizard until reaching the NetWare page.
3. Set the three NDS mode parameters on the NetWare page:
PSERVER NDS Tree
Example:NW5TREE
PSERVER NDS File Server
Example:FILESERVERNAME
PSERVER NDS Distinguished Name:
Example:AXISXXXXXX.CONTEXT
4. Use the NetWare Administrator to create the printer, print server and queue objects in the
NDS tree and to link them to each other.
5. Use the Add Printer Wizard on your workstation to install the printer on your client. Note that
only NDS queue based PSERVER printing is supported. When installing, choose Network
Printer and browse to the queue you have just created. Alternatively, choose Local Printer and
select the queue you have just captured.
Any configuration and management of the AXIS 5470e/570/670e can be performed from any
standard Web browser. Please refer to Using a Standard Web Browser, on page 43.
Notes:
• In Pure IP environments, RCONAG6.NLM must be running on at least one file server in the
specified tree.
• If you have both IPX and IP enabled in your network, you can use AXIS NetPilot to install the
AXIS 5470e/570/670e and to connect print queues. See Queue-based NetWare Printing (IPX),
on page 34.
• Pure IP requires that you run NetWare 5 or higher.
Setup for NetWare
33