Queue-Based Netware Printing (Pure Ip) - Axis 5400 User Manual

Setup for NetWare
12

Queue-based NetWare Printing (Pure IP)

Follow the instructions below to install the AXIS 5400/AXIS 5600 in the NetWare
Pure IP environment:
1. Start the Configuration Wizard from the User mode in the AXIS 5400/AXIS
5600 Web interface.
2. Click your way through the Wizard until reaching the NetWare page. Make sure
that the PSERVER_NDS parameter is set. If you want to change the parameter
value or if the parameter value is empty, enter the desired values. The parameter
value must include the tree or the preferred file server you want to login to and
the print server name including the context.
3. Use the NetWare Administrator to create the printer, print server and queue
objects in the NDS tree.
4. Use the Add Printer Wizard on your work station to install the printer on your
client. Note that only NDS queue based PSERVER printing is supported. When
installing, choose Network Printer and browse to the queue you have just
created. Alternatively, choose Local Printer and select the queue you have just
captured.
Any configuration and management of the AXIS 5400/AXIS 5600 can be performed
from any standard Web browser. Please refer to Using any standard Web browser, on
page 23.
Notes:
If the PSERVER_NDS parameter includes the name of a tree and not a specific file server,
RCONAG6.NLM must be running on at least one file server in the specified tree.
If you have both IPX and IP enabled in your network, you can use AXIS NetPilot to install the AXIS
5400/AXIS 5600 and to connect print queues. See Queue-based NetWare Printing (IPX), on page 13.
Pure IP requires that you run NetWare 5 or higher.
AXIS 5400/AXIS 5600 User's Guide