Verifying The Communication - Axis 5470 User Manual

AXIS 5470e/570/670e User's Guide

Verifying the communication

Follow the instructions below to verify the communication to the AXIS 5470e/670e:
1. Type WRKCFGSTS *DEV AXISPR1 on the AS/400 command line and press Enter. The
previously created printer device will be displayed. The status of the printer device should be
.
VARIED OFF
2. Vary on the printer device by typing
3. Press F5 to refresh the display. The printer device should now be
4. Start the printer writer by typing STRPRTWTR AXISPR1 on the AS/400 command line.
Press Enter.
5. Press F5 to refresh the display. The printer device should now be
6. Direct a printout to this printer device. A successful printout verifies the communication link
between the AS/400 and the AXIS 5470e/670e.
AS/400 IPDS over PPR/PPD Printing
in the field. Press Enter.
1 Opt
.
VARIED ON
.
ACTIVE/WRITER
17