Secure Computing SG300 User Manual page 42

Note
Contact your network administrator if you are unsure of any of these settings.
The first IP address is used by the web management console
Enter this address as the IP Address, and the subnet mask for your LAN as the Subnet
mask.
Ensure DHCP assigned is unchecked.
You may also enter one or more DNS Server(s) and a Gateway address to be used by
the SG unit, not your PC, for access to the Internet. Typically this is not necessary, as
only your PC needs to access the Internet.
Click Update.
Next, configure your PC with the second IP address in the same manner you would as if
it were connected to the LAN with a regular network interface card.
Click Start -> (Settings ->) Control Panel and double click Network Connections.
Right click on Local Area Connection (or appropriate network connection for the newly
installed PCI appliance) and select Properties.
38
Getting Started