Secure Computing SG300 User Manual page 20

Note
The new password takes effect immediately. You are prompted to enter it when
completing the next step.
The quick setup wizard is displayed.
Changing the Hostname is not typically necessary.
Select how you would like to set up your LAN connection then click Next.
Note
You must select Manual configuration in order to enable the SG unit's built-in DHCP
server. The SG unit's DHCP server automatically configures the network settings of PCs
and other hosts on your LAN.
Changes to the SG unit's LAN configuration do not take effect until the quick setup wizard
has completed.
Select Manual configuration to manually specify the SG unit's LAN connection
settings (recommended).
Getting Started
16