Callme Messages - Hitachi SelecSet 900 Series User Manual

Callme Messages

About callme
messages
Leaving a
callme using
the CLME key
Canceling a
callme message
HCXTD850, Rev. A02, August 2001
You can send callme messages to other stations in your
facility. When you leave a callme message, a message
waiting lamp lights at the called party's phone. The user
can return or delete the message, or exit the display
without affecting the message.
While the called party's phone is ringing...
1
Press the <CLME> autodial key.
2
Listen for confirmation tone (three short beeps).
3
The message waiting lamp on the called party's phone
lights.
To cancel a callme message you have registered for
another user, follow these steps:
1
List your handset or press <SPKR>.
2
Dial the callme cancel feature
access code.
3
Listen for confirmation tone.
C M
ALLME ESSAGES
2-43