Using Switchhook-Flash-To-A-Trunk - Hitachi SelecSet 900 Series User Manual

U S
SING WITCHHOOK

Using Switchhook-Flash-to-a-Trunk

Using
switchhook
flash to a trunk
Conditions for
usage
3-34
-F - - -T
LASH TO A RUNK
You can use the switchhook-flash-to-a-trunk feature to
access additional communication features offered by your
local telephone company.
Transfer is one of the most commonly used and most
beneficial features of this type, because it prevents tying
up two communication trunks.
To transfer a call using switchhook flash to a trunk, the
following conditions must be met:
• You must be talking on an incoming call from a central
office phone
• The trunk over which this call is received must be set up
to use the SHF-to-a-trunk feature.
Ask your system administrator if your system is set up for
this feature.
S
ELEC
HCXTD850, Rev. A02, September 2001
S 900 U G
ET SER UIDE