Other Functions; Audio Switching - Hitachi CLE-971 User Manual

OTHER FUNCTIONS

Audio Switching

A2 / NICAM / Sound Multiplex (TV mode)
• The I/II button in remote control is useful for NICAM and sound multiplex signals.
Otherwise pressing this button will have no effect.
BILINGUAL / DUAL sound broadcast
When bilingual program is received, sound mode display appears as shown on right.
Press the I/II button to select the sound to be heard.
Each time the button is pressed,
When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
I
NICAM signal received
NICAM I
STEREO sound broadcast
When a stereo program is received, sound mode display will appear, and you can press the I/II button to select between stereo and
mono sound.
Each time the button is pressed,
When receiving NICAM signals, NICAM display will appear as below.
Sound multiplex signal received
NICAM signal received
NICAM
Monaural sound broadcast
When a monaural program is received, sound mode display will appear.
NOTE
• If sound signal is not strong enough for quality reception, press the I/II button until
clear mono sound.
• If sound has hiss noise or keep switching between stereo and mono mode due to signal condition, press the I/II button until
appears on the screen to receive a clear mono sound.
34
I Language A, II Language B,
Yellow
Yellow
II
Yellow
Yellow
NICAM II
Mono or Stereo appear cyclically on the screen.
Green
NICAM
I/II Language A/B or Mono appear cyclically on the screen.
Yellow
I/II
Yellow
NICAM I/II
Red
Red
appears on the screen to receive a
1
ABCDE
Green
Green
NICAM