Hitachi CLE-971 User Manual page 13

COMPONENT NAMES (continued)
Remote control (continued)
1. POWER button
Press this button to turn the TV set on or standby.
2. I/II button
Press to select sound mode: Mono
3. (MUTE) button
Press to mute the volume. Press again to restore the volume.
4. RECALL button
Press to display source input signal on the display. When the PIP function is working, press to display audio source.
Then press buttons to select between the sound of your main picture or PIP.
5. PC button
Press to switch directly to PC mode.
6. TV/VIDEO button
Shortcut to access the TV, Composite Video, S-Video, Y/C
the selections.
7. HDMI button
Press to switch directly to the HDMI mode.
8. SLEEP button
Press the sleep button repeatedly to set the sleep timer to 30, 60, 90, and 120 minutes
9. --/--- button
Press this button to choose specific number channel for two or three code upper channel. For example when select "--",
you can only choose one or two code channel. When select "---", you can choose one, two or three code channel.
10. NUMBER buttons
Use Number buttons with --/--- button to choose specific channel.
11. RTN (RETURN) button
Press this button to toggle between the current and last channel viewed and press jump back to last page of OSD.
12. EXIT button
This button will exit all On-Screen Displays.
13. MENU button
The MENU button will start the OSD.
14. buttons
Press Up/Down/Left/Right buttons to adjust the options under OSD menu.
15. ENTER button
Press ENTER button to select the functions under OSD menu.
16. CHANNEL POSITION+/- buttons
Press Channel +/ Channel - buttons to change channels under TV mode.
17. VOLUME+/- buttons
Press Vol+ / Vol- buttons to increase and decrease the volume.
18. SORT button
Press to access the TV channel list table.
, Stereo , Language A
/C and Y/P
B R
, Language B , Language A/B
/P mode. Press repeatedly to circle through
B R
.
13