Advertisement
8. Repeat Step 4-7 for the setting of COM4, COM5 and COM6.
3.5. Windows NT4.0 installation
1. Power up the system, and insert the Driver CD into your CD-ROM/DVD.
2. Browse the Driver CD, and points specify a location, example X:\PCI IO Host
\OXmPCI \Win_Driver_v6.5.1.5\Windows_NT4.0.
3. Double click on the "Install_Serial" icon.
4. The wizard will display " Windows NT4 Device Installer ", and click " Next".
5. The wizard will display " OxSer.INF ", Select " INSTALL ", and click " Next", "YES ".
9.
When the wizard display " The operation was completed successfully, and the
driver has been started. ", Click "Exit".
3.6. Frequency Setting & Installation
NT4.0
Follow the instructions in this section to verify that the controller was installed
correctly.
under Windows
Verifying
Advertisement
