Advertisement
2. Double click " Multifunction adapters ", If there is no yellow "!" or "?" in front of
OX16PCI954 PCI UARTs (unique bars)
OX16PCI95x PCI bridge
The driver has started correctly.
3. Double click another "Ports", If there is no yellow "!" or "?" in front of
PCI Communications Port (COM3)
PCI Communications Port (COM4)
PCI Communications Port (COM5)
PCI Communications Port (COM6)
The driver has started correctly.
4. To view information about the devices attached to the controller, right click the "PCI
Communications Port (COM3)" and select Properties from the context menu.
5. Select the tab labeled "Data rate ". Select " Crystal Frequency " at 14.745MHz or
Select " Detect Crystal Frequency " for automatically selected for Input Clock.
6. Select "Use default baud rate" on "Baud rate configuration options".
7. Repeat Step 4 - 6 for the setting of COM4, COM5 and COM6.
3.3. Windows 9X / ME installation
1. Power off the system. Insert PCI Card into an available PCI slot. Power up the system.
2. The Hardware wizard will display that it found New Hardware Wizard, Select "Specify
the location of the driver (Advanced)", and insert the "Driver CD" in your
CD-ROM/DVD drive, and click "Next".
Advertisement
