First-Time Installation; Select Language - Philips MCi500H/05 User Manual

Note
•
If no buttons are pressed for 20 minutes, the MCi500H
switches to standby.
1
To turn on the MCi500H, press .
2
To switch the MCi500H to standby, press
.
3
To switch the MCi500H to eco standby,
press and hold the button on the top
panel.
Note
•
When the MCi500H is in eco standby mode, the
remote control is inactive.

First-time installation

When you connect the MCi500H to the power
supply, the automatic installation process starts.
You must select the language before you can
continue.

Select language

When you connect the MCi500H to the power
supply for the first time:
1
Wait until the language selection menu
pops up, to select your language.
2
Press or , then to select language.
The display shows the Home menu.
»
To select the network settings, follow
»
the steps on how to Connect to a
home network (see 'Connect to a
home network' on page 11).
Tip
•
After the first-time language set-up, you can change the
language in the Settings menu.
EN
10