Prepare; Install Remote Control Batteries; Position Your Mci500H; Connect Ac Power - Philips MCi500H/05 User Manual

3 Prepare

Install remote control
batteries
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Risk of decreased battery life! Never mix different
brands or types of batteries.
•
Risk of product damage! When the remote control is
not used for long periods, remove the batteries.
1
Open the battery compartment.
2
Insert 2 AAA batteries with correct
polarity (+/-) as indicated.
3
Close the battery compartment.

Position your MCi500H

Caution
•
Risk of product damage! Place the MCi500H on a
surface that is level, flat, and strong enough to support
the MCi500H.

Connect AC power

Warning
•
Risk of product damage! Ensure that the power supply
voltage corresponds to the voltage printed on the back
or the underside of the MCi500H.
1
Connect the MCi500H to the power
supply
Your MCi500H turns on and is ready
»
to be set up for use.
Note
•
The type plate information is located at the back or at
the underside of the MCi500H.

Turn on / switch to standby

You can select from the following status options:
• On
• Standby
• Active standby. The button on
the remote control can turn on the
MCi500H.
• Eco standby
• Passive standby. Only the button
on the top panel can turn on the
MCi500H.
EN
9