CareFusion Bird Sentry User Manual page 9

Bird Sentry™ Blender
● Users are advised to use pressure regulators, set to 50 ±5 PSIG(3.4± .4 BAR), which display
system pressure.
● All specifications assume the following standard environ mental conditions, unless specified
otherwise. Ambient and sample gas temperatures of 77°F (25°C); barometric pressure of 30:Hg
(760mmHg); sea level altitude; ambient relative humidity of 50%; sample gas relative humidity
of 0%
● It is important to note that the oxygen concentration selection scale is provided only as a
guideline for selecting 0, concentrations. The clinician should use the display panel of the Bird
Sentry blender to adjust the O
Equipment Symbols
The following symbols appear on the Bird Sentry blender.
Symbol
L1383 Rev. D
concentration to the desired setting.
2
Compliance
IEC 578
Symbol #03- O
2
IEC 417
Symbol #5016
IEC 417
Symbol #5034
IEC 878
Symbol #01-08
IEC 878
Symbol #01-07
CareFusion products symbol
CareFusion product symbol
Meaning
Attention, consult the accompanying
documents.
Fuse
Input
Standby (circuitry off) position of the
On/Off switch. It does NOT switch the
blenders mixing ability to turn power
off.
On condition for the display circuitry
of the equipment.
Lock (used to prevent accidental
changes to set values.)
The front panel Lock icon is
illuminated when the control panel is
locked.
Silence condition of the audible alarm
for a period of up to two minutes
(120 sec.)
ix