Chapter 5: Cleaning The Bird Sentry Blender - CareFusion Bird Sentry User Manual

Bird Sentry™ Blender
Chapter 5: Cleaning the Bird Sentry™ Blender
Warning!
Explosion hazard. DO NOT gas sterilize the Bird Sentry blender.
The Bird Sentry blender should be kept clean and free of dust. The exterior of the Bird Sentry blender
may be cleaned with a soft cloth lightly dampened with warm soapy water or mild disinfectant. An all-
purpose cleaner may be used on the exterior of the Bird Sentry blender. Store the Bird Sentry blender in
a clean, dry place when not in use.
Note:
Only the exterior of the Bird Sentry blender may be cleaned by using an all-purpose cleaner.
1. Do not steam autoclave or otherwise subject the Bird Sentry sensor to temperature over 120°F
(50°C),
2. Do not immerse the Bird Sentry blender or sensor into liquid decontamination agents.
3. Do not use any strong solvent cleaners on labels.
L1383 Rev. D
15