Bottom View - CareFusion Bird Sentry User Manual

Chapter 1: Introduction
N Low Alarm Display Control
The low alarm setting is displayed at all times just below the LOW icon on the LCD readout. The
indicated value represents the oxygen percentage at which the low alarm will be activated. In the
Low Alarm Set mode, the LOW icon will flash at a one-second rate. In a low alarm condition, the
low alarm value will flash in conjunction with the low alarm LED.
O Outlet Port
A diameter indexed (DISS) oxygen fitting that, when connected with a pneumatic metering device
(such as a flow meter or ventilator), delivers flows from the Bird Sentry blender from 2–100 LPM.
P Medical Air Inlet Connector
A diameter indexed (DISS) air fitting for connection to an air-inlet hose from the air-gas source.
Q Oxygen Inlet Connector
A diameter indexed (DISS) oxygen fitting for the connection of an oxygen-inlet hose from the
oxygen-gas source.
R Oxygen Concentration Selector Control
A knob that allows selections of mixed oxygen concentrations from 21 to 100%.
Note:
The oxygen-concentration selection scale is provided only as a guide for selecting O
concentrations. You should use the Bird Sentry blender display panel to adjust the O
concentration as needed.

Bottom View

A Dovetail Mount Adapter
An adapter that allows the Bird Sentry blender to be mounted onto a mating bracket for
mounting to a rail or ventilator system.
Figure 2 Bottom view
4
Bird Sentry™ Blender
2
2
L1383 Rev. D