PRESONUS StudioLive 16.4.2 User Manual page 55

2 Controls & Connections
2.10 Digital Effects | Master Control
Creating & Recalling a Scene
2. 1 0.2
The Fat Channel will be restored to the same setting for every input and output on your StudioLive.
Each of the dynamics as well as the four bands of the EQ will be turned off. Their parameters will
be set as follows:
HIPASS NOISE GATE
OFF THR N/A
REL .05 s
Before beginning any new mixing situation, it is always recommended to recall the Zero Out (Board
Reset) scene. This is the easiest way to ensure that there are no lingering parameter settings that
could cause you some trouble in your new mix.
To recall a Scene, press the Scene button and
use the Value encoder to scroll through the Scene
library. When you have found the Scene you wish
to recall, press the Recall button. By default, the
StudioLive will recall all of the available stored
parameters (Fat Channel settings, fader and
knob positions, channel muting and soloing, aux
mixes, and internal effects parameters); if you
do not wish to recall a certain set of parameters,
simply use the Next and Prev buttons to navigate through the screen. When the parameter that
you wish to disable is selected, turn the Value Encoder counter-clockwise to move it to the No (off)
position. Once you have disabled the parameters you do not wish to recall, press the Recall button.
The StudioLive's recallable parameters are grouped as follows:
• Mute: All channel and bus mutes (Channels 1-16, Subgroups 1-4, FXA, FXB)
• FX: All parameters for the internal effects assigned to FXA and FXB
• Assigns: All output and bus routing (Mains, Subgroups, Stereo Linking, Solo and Monitor
bus assignments, and Internal Effects to Aux Bus routing)
• EQ & Dyn: All Fat Channel dynamics processing and filter parameters (Phase, High Pass,
Noise Gate, Compressor, EQ, and Limiter) for every channel and bus
• Aux Mix: All aux mixes (analog Aux Mixes 1-6 as well as FXA and FXB mixes)
• Faders: All fader positions
• Pots: All knob positions (Subgroups 1-4, and Main Output faders and Aux 1-6 Outputs, FXA
and EFXB Levels, Cue, 2 Track In, Phones, Monitor, and Aux Input A and Aux Input B knobs)
• GEQ: Graphic EQ settings
FAT CHANNEL PARAMETERS
LIMIT COMPRESSOR
OFF THR 0dB
RAT 2:1
ATK 20 ms FREQ
REL 150ms
GAIN 0dB
KNEE hard
55
EQ LOW L.MID
P/S shelf n/a
H/L n/a low
130Hz 320Hz
GAIN 0dB 0dB
H.MID HIGH
n/a shelf
n/a low
1.4kHz 5kHz
0dB 0dB