PRESONUS StudioLive 16.4.2 User Manual page 16

2 Controls & Connections
The Patch Bay
2. 1
• Mono Output Level. This knob controls the maximum level of the Mono Output signal. The
signal can be attenuated to -40 dB and boosted up to +10 dB.
• Main Output. The StudioLive features both XLR and TRS main outputs. These outputs are
parallel to each other and to the mono output.
• Main Output Level. This knob controls the maximum output level of both the XLR and TRS
main outputs. The signal can be attenuated to -40 dB and boosted up to +10 dB
• Tape In/Out. The StudioLive is equipped with stereo RCA (coaxial) inputs and outputs that
can be used to connect a tape deck, CD player, or other consumer device. The tape-input
level is controlled by the 2Track In knob on the top panel. The main bus is routed post-fader
to the tape output.
• CR Output. These are the balanced control-room outputs. The level is controlled by the
Monitor knob in the Monitor section on the top panel.
• Pre-Insert Balanced Direct Outputs. These are the balanced, direct analog outputs
for the 16 channels. The DB25 connectors divide the channels into two groups of eight.
Balanced DB25 fan-out snakes can be obtained in various configurations at most recording
and live-sound retailers. Common fan-outs are DB25 to (8) XLRM and DB25 to (8) TRS. These
outputs are post gain, pre-insert, and pre-A/D converter. Only the microphone preamps and
line level inputs are available through the direct outputs. The firewire returns (See Section
3.3.1 for more information) cannot be patched to the direct outputs.
DB25 Pinout
H = Hot
C = Cold
G = Ground
16