Acer MG3001-p User Manual page 54

Acer MG3001-p User's Guide
Wireless networks
If you have a wireless network environment you need to choose between Wireless
(Ad Hoc) or Wireless (Access Point) modes.
The Ad Hoc setting is used for a peer-to-peer (PC to PC) wireless network that does
not include a router or an access point. The Access Point setting is used for networks
that include an access point or router.
Select the type of network you require and press OK to progress.
Note: For more information on networking terminology please refer to the Glossary.
Connecting an Access Point wireless network
Select Access Point and the system will search for your wireless LAN's network identity (or
SSID.)
Network Settings > SSID Selection
If successful, the search will show the available access points. Choose the SSID of the
access point that you wish to connect to and Press OK.
If wireless encryption (WEP) is required you will then be directed to the encryption
page.
If no encryption is required, please turn to the Available Server selection screen in the
Connecting a Wired Network section.
54